Cold Bending Machine is used for bending and re-bending tests of reinforcing bars, wire rod and wire for concrete in accordance with the requirements of EN ISO 15630-1.
The test piece is bent over a mandrel. The angle of bend and the diameter of the mandrel (D) is selected in accordance with the relevant product standard EN 10080.
The bend test is performed with a minimum angle of bend of 180° over a mandrel. According to EN ISO 15630-1.
For re-bend test, first the test piece is bend with a minimum angle of bend of 90° over a mandrel, in a second step, the aging treatment is applied and then the test pieces bent back up to a minimum of 20°. according to EN ISO 15630-1,
After the test, test pieces are inspected for cracks and fissures visible to a person with normal or corrected vision.
Mandrels for bent and re-bend tests should be ordered separately.
EN ISO 15630-1, 7438, EN 10080
Cold Bending Machine is used for bending and re-bending tests of reinforcing bars, wire rod and wire for concrete in accordance with the requirements of EN ISO 15630-1.
The test piece is bent over a mandrel. The angle of bend and the diameter of the mandrel (D) is selected in accordance with the relevant product standard EN 10080.
The bend test is performed with a minimum angle of bend of 180° over a mandrel. According to EN ISO 15630-1.
For re-bend test, first the test piece is bend with a minimum angle of bend of 90° over a mandrel, in a second step, the aging treatment is applied and then the test pieces bent back up to a minimum of 20°. according to EN ISO 15630-1,
After the test, test pieces are inspected for cracks and fissures visible to a person with normal or corrected vision.
Mandrels for bent and re-bend tests should be ordered separately.
